Parts & Accessories
$34.99 - $119.99
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Don’t let your adventures be limited to the pavement. The 16+ Wheel Kit improves handling over snow, sand and gravel. The kit includes two 16x3” push button wheels with a knobby tread. A wide range of acceptable tire pressures let you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps for your passengers. Say goodbye to the sidewalk. Constructed with aluminum rim/hub and stainless steel spokes.
Take your Burley all over town with the 2-Wheel Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. Leveling springs keep the stroller grounded on uneven terrain. Get out and explore with added versatility. - Easy conversion from biking to strolling - Fully pivoting wheels provide optimal maneuverability - Wheels easily slide into the trailer mounts - Includes: 8-inch Stroller Wheels (2) & Wrist Tether - Compatible with: 2019 – D’Lite X, 2019 – D’Lite Single, 2019 – Cub X, 2019 – Encore X, 2007-Current – D’Lite, 2007-Current – Encore, 2007-2018 – Solo, & 2010-2018 – Cub
Soft and snuggly, the Baby Snuggler keeps your littlest traveler comfortable and secure when jogging, strolling, or biking. Recommended for children 6-24 months of age. Child should be at least one year old before biking in trailer (child must be able to sit upright unattended and hold his or her head up while wearing a bicycle helmet). For children less than one year old it is recommended to only use the Snuggler for strolling and jogging.
A Burley Ballz Thru Axle is required for any bike with a 12mm rear thru axle to use the Coho XC (stock thru axles are not able to accommodate any sort of axle mounted hitch system). The Burley Ballz Thru Axle is not compatible with all carbon fiber bike frames (consult manual). - Official Burley Ballz adapter for bikes with 12mm rear thru axles - Includes both the thru axle and Ballz hitch mounts - Quick and easy installation - Specially designed for use with the Coho XC
Keep extra treats, leashes, and other essentials handy with the Bark Ranger™ Bag. Attachment points along the top of the Bark Ranger™ and Bark Ranger™ XL let you quickly and securely increase your trailer's cargo capacity. Large and small zippered pockets provide multiple storage options for you and your pet's gear while on the go.
Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ Kickstands. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Biking or strolling, the Bark Ranger™ Kickstand helps your dog’s trailer stay level and steady when not in motion. Easy to fold and unfold, the kickstand can be installed on the front or back of the trailer to allow for stable loading and unloading. When you pause for a mid-ride water break or stop to talk to a friend during a stroll, the kickstand provides added stability to keep your pet feeling secure and comfortable. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Size L x W x H (in) 11.2 x 0.9 x 3 - Size L x W x H (cm) 28.5 x 2.3 x 7.5
Keep your little one warm so your routine doesn't change when the weather does. • Super soft interior is plush next to your child’s skin. • Compatible with most 5-pt harness systems and systems that include a lap belt. • Velcro backing for a perfect fit with all Burley trailers and strollers. • Recommended for children ages newborn to 2-years old. • Machine-washable.
Find new horizons and discover new trails when you hitch your bike to a Coho XC® cargo trailer using the Coho® Thru Axle. Designed for bikes with 12mm thru-axles, the Coho Thru Axle is available in multiple thread pitches and lengths to accommodate a wide range of bikes. Note: The Coho Thru Axle is required for any bike with a 12mm rear thru-axle to connect to the Coho XC. Stock axles are not compatible with the Coho XC hitching system.
Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.
The Coho 16+ Wheel Kit sports a 16 x 3-inch knobby tire, offering superior handling on unpaved surfaces including gravel, sand, and snow. Now, nothing can stop the Coho XC from coming along for the ride. A wide range of acceptable tire pressure lets you adjust the stiffness to your liking. Let a little air out and the tires soak up the bumps. - Specially designed for the Coho XC - Aluminum rim & hub - Stainless steel spokes - Knobby tread for superior handling - Quick release wheel
Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction
The Coho Pannier Rack allows for the attachment of panniers to the fender of the Coho XC. The 10mm bar allows for use with many different types of panniers. Pair the Coho Pannier Rack with the Burley Pannier Set for even more carrying capacity on your Coho XC. - Specially designed for use with the Burley Coho XC - Easy installation - Compact form factor
Classic roll-top design and heat-sealed seams make this spacious 75-liter dry bag totally waterproof. Constructed with 500D tarpaulin fabric that is both tough and lightweight. Includes shoulder strap and carry handles. - Capacity: 75 liters - Weight 2.62 lbs. - Shoulder strap and carry handle - Designed for Burley Coho XC and Flatbed bike trailers
Replacement safety flag for extra visibility.
This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.
Convert your Burley into a jogging stroller. It's the perfect way to expand the capabilities converting the trailer to a jogger. Tracking adjustment fine tunes the orientation of the front wheel. It's the perfect accessory for any family on the run.
Burley's Nomad Cargo Rack is made of lightweight, sturdy aluminum and mounts easily to your Nomad trailer (sold separately) so you can expand your carrying capacity and haul even more stuff on your journeys. Now there's no excuse to leave anything home!
Burley's Stroller Kit easily converts Burley's child and pet trailers into strollers, making it possible to walk and jog with them. It includes a stroller wheel that folds up for convenience as well as a parking brake and wrist tether for security. • Stroller wheel stays attached and folds up out of the way when cycling • Tool-free adjustment makes switching from bike to stroll mode simple • Adjustable tracking makes for consistent, easy rolling • Burley's easy-glide tow bar retracts closer to the trailer for easy maneuverability • Stroller wheel pushes easily Compatible with: 2007-Current D'Lite 2007-Current Encore 2007-Current Solo 2007-Current Cub 2007-Current Honey Bee 2008-Current Tail Wagon
Your pet will feel right at home in their bike trailer when they curl up in this cozy bed. Soft side bolsters and a microsuede top layer provide a cozy space for your pet as you explore together. This comfy pet bed offers the perfect spot for your dog to curl up and enjoy the ride. Soft side bolsters provide a cozy space to help your pet feel safe and secure as you explore together. To keep it smelling fresh, the foam inserts are easily removed for a quick spot clean or to handwash the cover. Pro tip: using the bed as your dog's regular snooze spot at home is a great way to help them feel more at ease in their new trailer! You'll Love – - The Pet Bed is sized to fit perfectly in the Tail Wagon® and Bark Ranger™ - Side bolsters provide additional protection and snuggle-ready comfort - Foam inserts are fully removable for easy cleaning of the cover - Easily remove from the trailer for use as a bed outside of the trailer - Soft microsuede top provides a comfortable surface for your pet Specifications: - Dimensions L x W x D (in) 33.5 x 17.3 x 5.9 - Dimensions L x W x D (cm) 85 x 44 x 15
Small but mighty, the Pet Trailer Pouch is the ultimate versatile storage solution. The large, zippered pocket is perfect for carrying smaller gear or for cleanly packing out pet waste. With integrated attachment points on the side of each pet trailer, securing the Pet Trailer Pouch is a breeze. Biking, hiking, or strolling, this added storage option is the perfect solution for you and your furry friend's next adventure.
The Premium Seat Pad provides cushioning with an adjustable headrest to keep your little one comfortable and supported. The hand-washable padding is easily removed for cleaning. - Seat and shoulder strap padding - Headrest for added support - Removable and hand-washable - Includes: Seat Padding, Shoulder Strap Padding, & Headrest - Compatible with 2016-Current child trailers
Keep your Burley pet trailer (sold separately) stable and make loading and unloading your 4-legged family member super easy with this kickstand. It folds up and out of the way when it's time to go, too.
Take your furry friend all over town with the Tail Wagon Stroller Kit. The wheels connect directly to the frame for a compact footprint to turn on a dime in tight spots. - Tool-free installation - Stroller wheels push easily - Compact footprint for maneuverability in tight spaces - Compatible with 2008 – current Tail Wagon models
Equip your bike for next-level adventures with the Burley Thru Axle. This simple to install adapter opens the door to new biking possibilities by allowing you to connect a kid, cargo, or pet bike trailer to bikes with 12mm thru-axles. If you are unsure of the correct thread pitch or hub length, please consult with the manufacturer of your bike, or your local bike shop before purchasing a Burley Thru Axle.
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.
Page 1 of 2 Next page