650B

Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. Already this wheelset and its MOTO Technology are proven with multiple victories in the Enduro World Series with our pioneering partnership with Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers-uninhibited by legacy technology-took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. Zipp's Speed Line graphics give you the choice of five colors for a wheel with high-performance aesthetics. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

- 27.5"x20 KT Alloy ATB style front wheel - STW A275 silver rim with silver hub - UCP silver spokes

Rims: Evo Tour 19 27.5" - ETRTO 584-19 - Inner width: 19mm - 6061-T6 Alloy - Double Wall - Powder Coat satin black finish - CNC machined sidewalls - Drilled for Schrader valve - Rim or Disc Brake compatible - 36 holes Front hub: - QR 9x100mm (Quick Release binder included) - 6-Bolt ISO disc mount - 6061-T6 Alloy - Anodized black finish - Adjustable bearings - Rubber seals

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT400-B (Boost, HG) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT400 (Black), Shimano logo, 15mm E-THRU, O.L.D. 100mm - HG Freehub compatible with 8 - 10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

The aluminum Enduro wheelset made for the roughest Enduro tracks around the world. We have taken all our aluminum wheel know-how and put it into this high-performing package. EX 1700 SPLINE wheels are based on our famous 36T RATCHET hubs combined with a super-strong and welded 30mm-wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double-butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating.

Are you already planning your next bikepacking trip? The GR 1600 wheels are made for gravel adventures and all those unique experiences one can find far away from the tarmac and the rest of the road cycling community. A super durable aluminum wheel made of reliable components that supports you for endless miles of troublefree riding pleasure. Ready to explore the world? With the GR 1600 you definitely are. - 350 based hub

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires - 36T RatchetSystem technology

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

The entry into the world of gravel riding, the G 1800. If you want to give cycling a try and plan to do your first rides off-road the G 1800 is your choice of wheel. Combining all the key advantages of DT's gravel segment wheels at a very attractive price point, these wheels may be your entry into the world of gravel riding. Leave for beaten roads and turn to the unexplored paths, the G 1800 will join you. - 370 based hub

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36-tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Proterra Light i25 wheels care for all your Road Plus adventure riders out there. The extra traction and comfort of a high-volume 650B tire is pretty nice, eh? Proterra Light i25 wheels feature an open-cavity profile to minimize weight and maximize efficiency as you get lost on backroad detours. Like all other Proterra wheels, the responsive 6-pawl freehub offers 3.7 degrees of reliable engagement, whether you're cruising to work or have your frame bag bursting at the seams for an overnight adventure. Designed for Road Plus, because more volume is always more fun. - 25mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Top-tier EZO sealed bearings - Center Lock rotor mounts

Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8 - 10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Tubeless Valve included)

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Front hub: Shimano HB-MT400-B Boost - 15x110mm (Axle not included) - Center Lock (6-Bolt adapter included) - Angular contact bearings - Contact sealed hub Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400 (Black), Shimano logo, 12mm E-THRU, O.L.D. 142mm - HG Freehub compatible with 8—10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Formula DC20 (Black), Laser etched logo, M9x100m - 6-bolt disc mount - Adjustable bearings - Quick-Release binders included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Formula DC22 (Black), Laser etched logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binders included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST - Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141 - HG Freehub compatible with 8-10, MTB 11-speed - 6-bolt disc mount - Sealed bearings (DC711 & DHT148) - TA Axles not incl. - Quick Release binder included (DC2241) - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)

WCS Zeta GX 650B TA12 Wheelset

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

- Evo Tour 19 27.5" double wall rim—Black - Inner Rim Width: 19 mm - Rim Height: 20 mm - Pin joint construction - No Eyelets - Schrader valve - 36 holes - Stainless steel spokes—Silver - Freewheel

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (-01): Alloy, Disc and Rim brake compatible, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheelbuilders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Front hub: Shimano HB-MT400-B (Black), Shimano logo, 15mm E-THRU, O.L.D. 110mm BOOST - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i30 (Black), inner width: 30 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT400-B (Black), Shimano logo, 12mm E-THRU, O.L.D. 148mm BOOST - HG Freehub compatible with 8—10, MTB 11-speed - Quick Engagement Pawl Ratchet (36T / 10deg engagement) - Center Lock disc mount - Adjustable bearings - E-THRU Axles not included - Tubeless Compatible (Tubeless Valve included) Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Affordable and reliable disc brake wheelset for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience - 36 stainless steel spokes and brass nipples for improved durability - TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes.

Sta-Tru Double Wall Rear Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Valve: Schrader - Tire Type: Clincher - Rear Axle: QR x 135mm

- 27.5"x20 KT Alloy ATB style front wheel - STW A275 silver rim with silver hub - UCP silver spokes

Sun Duroc 40 Disc blk 32h - -01: STW Turbo Boost 6-Bolt disc - -02: STW Turbo Boost Shimano 6-Bolt disc

- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - 30mm internal width tubeless ready rim

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano FH-MT410-B (Boost, MS) - 12x148mm (Axle not included) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline only Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 4.5mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - One length spoke used throughout wheelset (F&R)

Trail wheels often fall into two categories—they're either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flickable, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they're far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they're strong, impact-resistant, and tire supporting-they must be heavy, right? Wrong. Even though "fattie"? is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered. - Assembly Method: Hand-built - Bearing Type: Sealed cartridge - Every wheel includes tubeless valve stems in order to make tubeless set-up a touch easier. - Front Hub: Alloy body, 15mmx110 thru-axle, 19 and 31mm OD end cap options included. - Front Spoke Pattern: Two-cross - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Rim Material: Carbon fiber - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Width: 30mm internal - Roval Engineered J-bend hubshells have a single spoke length for each wheelset. - Spoke Count: 28h Front - Spoke Type: DT Swiss Competition Race J-bend - Total Wheelset Weight: 1690g

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

A carbon structure optimized for impact resistance, a reinforced flange and the ideal resin-carbon fiber ratio make the EXC 1200 Spline the benchmark in the Enduro sector. The rim's inherent strength allows the use of extremely lightweight Aerocomp and Aerolite spokes and generates optimum wheel stiffness. The heart of this wheel is a 180 Straight Pull hub with smooth-running SINC Ceramic bearings and the newest Ratchet EXP freehub system. - Requirement-specific carbon rims are designed for the ultimate enduro riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - SINC ceramic hub bearings are engineered with optimum bearing clearance for minimum friction - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT ProLock Squorx ProHead aluminum spoke nipples

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

- Large oversized flange for improved bracing angle making a stiffer wheel - Larger bearings spaced wider apart for better stability and durability - Six double tooth pawls give 120 points of engagement at a 3-degree rotation - 30mm internal width tubeless ready rim

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

SURVIVAL OF THE STRONGEST More Than the Strongest Carbon Wheelset In Our Known Universe, Traverse HDs deliver unbeatable control and pinch-flat resistance in severe terrain, unlocking progression in the bike park, on a trail ride, or on an Enduro World Series track. STRONG LIKE BULL (NO BULL) Our strongest off-set rim shape molded with optimized carbon fibers for front and rear specific characteristics, add up to our strongest carbon trail wheels we have ever made. SMOOTH AND STRONG Front layup delivers a smooth, control-enhancing ride, while the rear optimizes stiffness & impact strength. HIGH PRECISION HANDLING The fusion of control and durability; where stiffness meets grip, HD glues you to your line and snaps you to the next with precision and speed. SAYONARA PINCH FLATS Optimized "Flat Top" bead profile requires 85% more force to pinch flat compared to a standard round bead, virtually eliminating "snake bites." AIR TIME Thank our genius engineer, Chuck Teixeira, for inventing the the "AirChuck;" a valve that threads directly into the rim eliminating compression nuts, air loss from rim flex, makes tire set-up easier, and reduces sealant clogs. INTENDED USE Aggressive Trail, Park, Enduro WEIGHT (29): 1,706g 240 EXP (with valve and tape) WHEEL SIZES 29 (F/R) 27.5 (R) FOR LIFE Lifetime warranty on Roval Wheels when registered within the first 90 days of purchase. 2 YEAR "It Happens" No Fault Crash Replacement - If you damage your Roval product while riding within the first two years of ownership and it's not covered under warranty, we'll still replace or repair. USA Only and wheels must be registered. STRUCTURAL WEIGHT LIMIT (Rider & Cargo) - 125kg / 275lbs

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim and Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula DC-20 - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes